DECONYL FLAT

interior emulsion paint

Emulsion paint suitable for interior surfaces. Suitable for plaster, gypsum board, concrete, brick, etc. after careful surface preparation. This low sheen emulsion paint covers imperfections on walls efficiently offering a uniform finish. An easy to use paint with high coverage. Provides a smooth velvet finish. Being ammonia-free, this paint is practically odourless. Ideal for your home, hotels, offices.

excellent coverage
high hiding power
exceptionally uniform matt finish

BUILDINGS – INTERIOR USE

matt

Finish

TOOLS

THINNING

1-2 hr

DRYING TIME

2-4 hrs

OVERCOATING INTERVAL

1- 2

RECOMMENDED COATS

11		2
m²/L

SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from defective or non-cohesive material, dust, oils and salts.

► Surfaces in sound condition:
Apply 2 coats of DECONYL FLAT.
► New plaster, concrete, brick, cement:
• Prime with FERM (H₂O) or Α-500 PRIMER. Apply 2 coats of DECONYL FLAT.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL FLAT.
► New gypsum board or putty:
• Prime with FERM (H₂O) or Α-500 PRIMER. Apply 2 coats of DECONYL FLAT.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL FLAT.
► Old water-based or lime paints:
Prime with FERM (H₂O) thinned up to 50% with water. Apply 2 coats of DECONYL FLAT.